Cozy by the Fire

Transforming Your Home: How to Convert a Wood Burning Fireplace to Gas

Introduction: What to Know Before Converting a Wood Burning Fireplace to Gas

Converting a wood burning fireplace to gas is an appealing option for many homeowners looking to reduce the hassle of tending to a real fire. Wood-burning stoves can also easily be converted for more efficient and convenient gas use. Before making the switch, there are several important factors to consider:

Safety: When converting from wood burning to gas, it’s essential that all necessary safety precautions be taken into consideration and followed. Make sure you check your state’s building codes for any regulations regarding the conversion process. Additionally, a certified HVAC technician will need to inspect your current chimney before installation is complete; this ensures that the flue accommodates the direct venting requirements needed for a gas appliance adequately and safely removes gases from inside your home.

Fuel Source: The type of fuel source used in your new gas fireplace must line up with what’s available in your area, as well as whether or not it’s suitable for your environment. Natural Gas (NG) or Propane (LP) are both common sources used when converting a wood-burning unit. Think about whether you have natural gas available in your area and if you have access to a long enough continuous propane tank should you opt for LP instead; all factors must be taken into account before deciding which will work best in your home.

Installation Cost: Despite being the “easier” approach, converting from wood to gas isn’t a cheap endeavor by any means; many components plus labor cost usually make up most (if not all) of such projects budget wise as majority of these retrofitting conversions require modifications in either venting system or parts such as fittings/lines/valves etc., Additionally, exiting electric connections can become costly if they have been outdated or if modifications have aged since first installed; it may then become mandatory that electrical work comply with today’s national standards/codes thus increasing project costs..

Overall Efficiency: Converting from wood burning to gas has its advantages when it comes to efficiency; however much larger gains can be seen with other combustion products like pellet stoves than with prefabricated units models running off NG/LP considering ideal operation scenarios on all sides.. The overall efficiency achieved through conversion depends largely on several criteria – enclosing design surrounding both fireplaces,gas insert size compared to total chamber volume among other factors – further analysis still remains pertinent before investing into such home upgrade regardless..

In conclusion, changing from a regular wood-burning fireplace over to one operated directly by natural gas/propane requires careful planning and analyses prior engaging into anything physical as risks presented vary depending upon already present conditions within household along with level of expertise existing corresponding contractor holds towards said undertaking ; Nevertheless ,provided everything meets recommendations made industry wide multiple benefits emerge potentially taking shape during post completion phase namely increase heating efficiency ,improve insulation quality while providing general convenience when starting & maintaining flames at right temperatures during winter time…

Step-by-Step Instructions for Converting a Wood Burning Fireplace to Gas

1. Consider your options. Before you get started, there are a few things to consider. To begin with, think about the type of gas insert you want. You can choose from direct vent systems that circulate air within the home or liquid propane or natural gas systems that vent through the wall and out of your home. Depending on the type of fireplace, different vents may be required for each option; therefore it is important to first determine species of wood burning fireplace you have and then decide on which type of gas insert is best for your space and specific needs before proceeding any further in the process.

2. Cut off electricity and monitoring purpose in your fireplace area. Make sure there are no electric wires connected to or near the existing fireplace before proceeding any further as safety must come first! Additionally, double-check to ensure that all pilot lights and other potentially explosive items around this area are monitored and turned off during conversion process.

3. Talk to a certified technician if necessary – For some conversions, it may be beneficial to talk to a CSA-certified technician who specializes in converting wood-burning fireplaces into gas models in order ensure everything is done safely as well as accurately following manufacturer instructions and local building codes..

4. Completely clean out the existing wood burning fireplace – This includes removing all ash, debris and flammable materials from inside housing itself (including inside walls) along with removing any existing chimney liner if installed at time of original installation so successfully adapt an appropriate flue liner for new conversion unit instead later down line… Doing complete job here maintains highest standards possible when putting together our brand new setup!

5a Measure and template size & position – Throughout this stage we will work methodically measure out dimensions along with taking accurate shape templates where necessary accommodate chosen insert style or shape… All measurements must remain consistent accurate throughout duration project avoiding any potential costly mistakes down road requiring rework repaired pieces later stages production!

5b Install metal lintel bar/set support for cording front panel freely slide away access interior frame – After measurements have been taken printed onto metal plates/bars used fabricate custom support needed hold limestone front panel place securely swing open doors frontal frames… These pieces essential part whole framework without which additional loads weight applied directly acting pillars basking feature weaker delivering insufficient stability risking collapse potential injury! HIGHLY RECOMMENDED nothing passed commissioned otherwise inspected check NO compromise safety!!

6a Mount inserted hearthstone – Once steps 1 through 5 completed turn attention inserting stones varying sizes cover entire surface energy efficient steel cast iron deflect heat room optimal effect reaching width depth allocated internal structure outer shell intended coverage protecting layer whereas gap remnants eliminated prevent emissions harms toxic byproducts endanger users health ailments worsen future generations environment … Installing simple yet very effective task requiring 2 people team tackle heavier materials situations often tending require practice make perfect lesson scale workout experience !!

6b Seal edges between insert hearthstone limit emission dangers associated regarding infiltration gasses toxins however always refer relevant government legislations secure closure accordance laws!!!

7 Connect blower & exhaust pipes ready use – Using correct sealed hose connecting view outlet pipe towards rear corner attaching blower extending its power ideal setting temperature!! Same time connect flexible tubing side opening channels leading straight outdoors keeping mind fresh air flow carbon monoxide toxic gases generated combustion mix atmosphere giving rise food poisoning suffocation death!! Special attention needs taken note vents correctly doorways windows try minimize loss bad aromas detectible presence odourless warning sign something gone terribly wrong!!

8 Test ignite manually put under command controls – With caution check firing up manually outside sources igniting switch found workings system effects spread widely visible sense over pride joy feeling knowing job finished wonderful efforts tangible result achieved!!! Activate controlling unit manoeuvre combusting vessel heat retained desired levels facilitate utmost customer satisfaction delectable source warmth generating nutritious meals nutrition benefit hungry family helping bringing group appeal back life!!!

Tools and Materials Required for Conversion

Are you looking to convert your basement into a rec room or other additional living space? If so, you will need the right materials and tools to make the transformation happen. Having the proper supplies can help ensure that everything runs smoothly and that your project achieves an outcome that is both durable and aesthetically pleasing.

When considering the materials needed for a conversion, you must address structural issues first such as foundations, floor supports, walls, plumbing and wiring. Materials such as framing lumber, construction adhesive, concrete mix, masonry and hydraulic cement should be at the top of your list. Depending on what type of conversion you are doing, other possible needs could include drywall screws and nails for hanging wallboard to create soundproofing effects; insulation to help increase energy efficiency; sealants and caulk in order to waterproof any walls; carpet padding if you plan on installing new flooring; radiant floor heating systems; tile grout if adding stone tile; base moldings; and drywall taping compound if finishing off drywall with texture or paint.

In addition to materials needed for a conversion project it’s important not to forget about tools either – power drills (for drilling holes in walls), saws (necessary for cutting material sizes correctly) circular saws (to help make straight cuts in sheet goods), electric screw drivers (for setting screws in anchors/fasteners quickly), hammers/mallets (useful for nailing wood trim along with many other uses) utility knives (perfect for scoring sheet material like dry wall or vinyl) levelers (great for ensuring accurate measurements when installing anything that needs to be mounted onto foundation wall surface), pry bars/crowbars(assists in removing broken studs amongst many other tasks). It goes without saying most of these items may already be lying around the Stanley garage but just incase there happens need a replacement don’t hesitate seek out help from your local hardware store before starting any major work.

The more organized and planned out you are ahead of time with regards materials as well tools, along with budget considerations than chances are much higher of all things going according seamless resulting in completion of successful job which looks amazing!

Costs Associated with Converting a Wood Burning Fireplace to Gas

Converting a wood burning fireplace to gas has numerous benefits, but these can come at a considerable cost. Gas fireplaces generally offer more heat than wood-burning models and they are easier to maintain due to the lack of soot, smoke, ash, etc. It is also possible to obtain flame effects that simulate the look and sound of burning wood with many even offering remote control operation. Despite their advantages, however, the process of installing a gas – burning fireplace will require significant investment in terms of money and time.

Materials: Replacing your existing wood-burning unit with a new gas model will require specialized materials for venting purposes such as black steel vent pipe or stainless steel liner which tend to be among the most expensive components. An experienced contractor should be consulted prior to purchasing any materials as some may not be necessary depending on the size and location of your current setup.

Labor: In addition to the cost for materials mentioned above, you should also consider what you may have to pay for labor depending on how complicated your installation project may be. Factors that determine price include clearly defined gas lines (existing or new) while “run outs” need to be calculated based on overall length between source and destination points. Additional targets like wall vents or electronic wiring must also be factored into estimates given by professional installers so make sure you get all details concerning pricing in writing before signing up for anything. Keep in mind that proper installation is essential for ensuring safe operation as well as warranty coverage if available on product chosen so pay only after work has been completed satisfactorily and thoroughly inspected by certified technicians when applicable.

Gas Burner Inserts: Those looking at keeping costs low may wish to consider replacing their old wooden insert with one designed specifically for use with natural gas or propane fuels (LP). These units tend to take up less space than traditional fireplaces but still pack plenty of punch when it comes heating efficiency as well as an array of options including flame height adjusters, fans for distributing air flow evenly around room where installed plus thermostatic controls allowing user set temperature desired anytime day/night year-round no matter type climate existing outdoors during corresponding seasons where property located at moment!.

Frequently Asked Questions (FAQs) About Converting a Wood Burning Fireplace to Gas

Q: Is it easy to convert a traditional wood-burning fireplace to gas?

A: Converting a traditional wood-burning fireplace to gas can be relatively straightforward for those with some DIY experience, however, it is best to consult a professional and certified heating technician before starting any work. Converting a fireplace requires specific knowledge of safety protocols and building codes, as well as an awareness of the overall design surrounding the project. Properly done, converting your fireplaces offers numerous benefits – like simplified maintenance and improved efficiency – that will last you for years to come.

Q: What are the differences between natural gas and propane fireplaces?

A: Natural gas is cheaper than propane, but in order to use natural gas, you must hook up your fireplace system directly to an external source – typically running lines from your home’s main gas supply or an underground tank. Propane on the other hand, uses tanks that are refilled periodically and which can be stored in either outside or inside locations. This makes installation more versatile than when using natural gas, but because of its relative scarcity (tank refill services comparison), propane tends to cost more. The exact costs per unit burn vary from region-to-region so it’s important to check pricing accordingly unless you choose a universal solution like electric fireplaces that simply plug into a standard outlet providing heat without using fuel sources at all.

Q: Is converting my fireplace safe?

A: Both natural gas and propane are combustible materials so taking proper safety precautions when working with them is essential. Careful consideration should go into planning out the process including factors such as anticipated utility bills, ventilation options available in venting products associated with these fuels and researching certified service providers who specialize in installing fireplaces correctly and following building code regulations. Additionally all necessary permits should be acquired prior to beginning any work on both building & safety related projects; while converting your old wood burning-fireplace presents numerous advantages over allowing it age naturally since doing this often increases risk of improper operation leading towards dangerous scenarios – making sure everything goes according right right plan helps reduce potential hazards significantly.

Top 5 Facts About Converting a Wood Burning Fireplace to Gas

Fact 1: Converting a wood-burning fireplace to a gas one is a relatively easy and cost-effective project that can be done by homeowners with the right tools and materials. Gas fireplaces require less maintenance than their wood-burning counterparts, in terms of both cleaning and upkeep. The process usually takes no more than a day or two and does not require any major construction work.

Fact 2: There are generally two methods for converting your existing wood-burning fireplace to use gas. The most popular form of conversion is to completely replace the wood-burning system with an full insert which allows vented or ventless operation; while the second type of conversion uses existing components and performs what is known as a “hybrid” installation between both fuel types.

Fact 3: While converting your fireplace can help improve heat efficiency, there are other safety considerations you should keep in mind when replacing your existing fireplace with a gas model. For starters, it’s important to make sure that the new unit is installed properly so that it vents safely outside instead of releasing carbon monoxide into the interior of your home; additionally, make sure that all parts used are certified for use by local fire codes and any applicable building codes too!

Fact 4: In addition to having much better heat output than wood burning fireplaces, gas inserts typically don’t release any smoke either—a real plus if you live in an area where smoky fires aren’t allowed due to air quality problems. Plus, unlike with traditional fireplaces, gas models won’t contribute ash or soot buildup to your chimney because they burn cleanly without producing those substances. And best yet? Lighting them requires just flipping a switch—no chopping or hauling logs necessary!

Fact 5: When it comes time to shop for your new insert, be sure to consider features such as size (will it fit within the space available?); convenience (how often will you need maintenance service?); thermal performance (what level of heat output do you need?); cosmetics (does it match the decor/style/feel of your living room?). Do some comparison shopping before making any decisions—it’ll pay off in spades in terms of finding both style AND savings!

Scroll to Top