Cozy by the Fire

The Ultimate Guide to Converting Your Gas Fireplace to a Wood Burning Fireplace

Introduction to Gas-to-Wood Fireplace Conversion: What is Involved

Are you considering replacing your gas fireplace with a wood burning one? If so, there is much to consider. Disconnecting the gas line, modifying the venting system, and re-certifying the building code of your home are just some of the important steps involved in a gas-to-wood fireplace conversion.

Stage One: Shutting Off The Gas Line

The most crucial step in converting your existing gas fireplace to a wood burning one is shutting off the existing gas supply and disconnecting the line from its valve or regulator feeder. To ensure safety, it is advised that you shut off the main gas supply line located near the furnace before beginning any other steps in this project. Once that is done, you will then shut off and disconnect any smaller lines leading directly to both your existing fireplace and other associated equipment such as logs or pilot lights. From there it’s time to proceed with Stage Two in this transformation process!

Stage Two: Fireplace Venting Modification and Alteration

The next task at hand requires modifications to your existing venting system and chimney flue. Removal of all previous vent pipe components must be done before installing new exhaust piping for excessive smoke release when burning wood for fireplaces generally require larger outlets than pipe systems used for gas fireplaces. Having specific measurements familiar with your chimney flue size as well as firebox opening size are key components necessary during this stage of installation process when selecting new piping suitable for operation with a wood burning style set up.

Stage Three: Adding Essential Fireplace Apron & Hearth Attributes

Once new piping is securely fitted into place, adding essential references that add aesthetic value while recognizing overall design structure elements remain paramount throughout this transformation journey! Installing hardware items such as brackets, mantelpieces & hearth pads modeled to compliment recently renovated space accent previously vacated walls while providing attractive external finishes perfect for showcasing newly added internal mechanisms just installed! Not only do these accents successfully blend regarding appearance within each homeowners desired vision but provide essential levels of safe keeping while also abiding by multi state mandated building code policies necessary when permanently housing any live fire sources in occupied living arrangements or dwellings alike! It isn’t until this final point where owners can confidently move onto Stage Four with peace of mind knowing minimum recognized safety procedures have been fully accounted for accompanied by adequate levels incident preparedness!

Stage Four: Regulatory Approval & Permission Filing

Last but certainly not least always check applicable codes governing city municipality; county jurisdiction prior operating newly modified combustible reaction . This particular step requires homeowners submit application permits documenting research conducted pertaining efficiency ratings adopted agreed upon standards put forth based brand pieces introduced within converted spaces ! Receiving clearance go ahead necessary pass final test verifying conformity compliance rules regulations set place local governing boards respectively approved subsequently brings entire conversion full circle !

Considerations Before Converting Your Gas Fireplace to Wood Burning

Before deciding to convert your gas fireplace from a gas source to a wood-burning source, there are some important things to consider. If you plan to do the job yourself, you should have access to all necessary tools and materials before beginning the process. You may even need assistance from a professional. There could be local codes and laws in place regulating ventilation or combustion standards that would be of importance when converting your fireplace. In addition, there are costs associated with a conversion such as those due for permits, flues, chimney repairs or modifications, firebox relining and new dampers – all of which should be carefully considered prior to making any alterations.

Your safety is also an essential factor throughout this project so it is critical that you thoroughly review the installation instructions from your manufacturer; as well as ensure proper insulation ratings within the firebox walls, proven door seals and gaskets around the doors of the hearth appliance. Furthermore, appropriate clearances need to exist surrounding combustible material for optimal fir performance & air flow….noted in your fireplace manual will also come in handy during this process.

Please keep in mind that once converted this type of set up requires manual intervention every time it’s used (opening/closing damper; removing & replacing grates for ash removal) – increasing complexity of function over a standard natural gas model -so be sure these manual steps make sense with your lifestyle usage before proceeding forward with the conversion..

Step-By-Step Guide to Converting Your Gas Fireplace

If you’re considering making the switch to a new, efficient gas fireplace in your home, you’re not alone! Gas fireplaces are becoming increasingly popular among homeowners because of their efficiency and convenience. But converting to a gas fireplace isn’t always a simple process. Here is a step-by-step guide for those looking to make the transformation:

Step 1: Make sure you comply with local codes – Before you start any work on your potential new gas fireplace, it is important that you check with your local building code regulations to ensure that it will be compliant when finished. Local building codes can vary depending on area and jurisdiction, so it is best to make sure everything is up to code before beginning any work.

Step 2: Choose the right size and style – The most important factor when choosing your new gas fireplace should be selecting one that fits properly within the space available. Measure out the spot where you plan to install thefireplace and make sure there is enough room for it according to manufacturer instructions. Look around for styles or features you like as well; remember this piece will be taking centerstage in your home so choose something that looks appealing!

Step 3: Decide if you want professional help – Some people are comfortable installing their own gas fireplaces while others hire professionals who know exactly what they are doing when wiring in a unit safely and securely. It may cost more if someone else does the installation but it could also save time as well as peace of mind knowing the job has been done correctly from start to finish.

Step 4: Secure all necessary permits – If required by your local code office (usually depending on how much work needs done), acquire any permits needed for installation prior to starting work off yourself or hiring someone else for assistance (which could mean paying an inspector or other fees). Most often this won’t be needed unless alterations such as removal of part or all of an existing chimney, brickwork etc., need done first before fitting can take place.

Step 5: Purchase Necessary Equipment – A full list of tools, components, materials etc.,that will be needed should come provided with your purchase; research online beforehand though justto double check settings options available too so both are accessible and accounted for come boughtime at store checkout/delivery day hereafter leaving no surprises thereafter once ignition button pressed! Lastly don’t forget safety equipment such as gloves & goggles either – these are essential when dealing with fragile dust pieces during tear down/installation phases better seen than felt ya know?

Step 6: Get familiar with venting requirements – All newly installed gas fireplaces need proper venting from ceiling through roof plane in order allow safe escape combustion byproducts post-burn time come each night’s end; consult listed user manual notes correspondingwith yourspecific model purchased detailing specifics information given pertaining thereto – another excellent place find gist entry point status justin case additional technical points arise lateron front duringuse requested hours given per state guidelines adherence reasons followed up hereby allowing bypass option possibilities via solutionside answers foundthereafter; nevertheless whatever method chosen end result must achieve its primary function meeting requirements Asked initial upfront days prior thereto understanding(s)application used thereupon accepted here alive !

FAQs About Converting Your Gas Fireplace To Wood Burning

1. What are the benefits of converting my gas fireplace to wood burning?

A: A converted gas fireplace has several advantages in comparison to a conventional wood burning unit, including the ability to save money and achieve more control over your fire size and heat output. With a traditional wood-burning setup, you will need to replenish your supply of logs often, plus factor in the cost of obtaining new logs as well as maintenance costs down the line. On top of that, with an open flame, you are limited in terms of how much heat you can generate and how precisely you can control it—unlike a gas fireplace burner which is easy to adjust either up or down on demand. In addition, you’ll get the warm ambiance from a real fire if you decide to convert your gas fireplace; something not all gas sets provide!

2. What steps should I take before starting a conversion project?

A: The first step prior to beginning any kind of conversion process for your gas fireplace is checking local building codes for any guidelines pertaining directly to adding wood burning equipment. After ensuring that everything checks out there, it’s important that you contact a qualified professional or team of experts who have experience with this process. They will be able to properly assess the situation and offer guidance tailored just for your unique requirements. Additionally they can help determine what parts may be necessary like venting systems or any additional hardware components required depending on specifics with the project itself.

3. How much does it typically cost to convert my existing unit?

A: This depends completely on the age and condition of your current set-up as well as other parameters determined by professionals familiar with performing such conversions successfully in your area—which again should always be carried out by certified personnel who understand both local regulations along with best practices when handling everything from venting / chimney system updates all the way down through installation tasks associated with smaller details involved within this type of job where accuracy matters most for long term features efficiencies supported by proper control covering both temperature levels & fuel types across different times throughout various seasons

Facts About Using a Wood Burning Fireplace After Conversion

When considering heating sources, a wood burning fireplace can prove to be incredibly cost-effective, efficient and reliable when properly installed. A growing trend is the conversion of an existing masonry or factory-built fireplace into a modern, highly efficient wood burning fireplace. While there are many advantages to converting an existing fireplace into a combustible burning fire unit, there are also some important facts to consider:

• By upgrading to a newer and more efficient model you can potentially save up to 90% of the heat generated by using wood instead of gas or electric powered heating methods. This increased efficiency not only saves money on utility costs but reduces your environmental impact as well.

• The use of airtight doors helps prevent convective heat loss through drafty chimneys while still allowing the fire’s natural beauty to be enjoyed.

• If you plan on burning soft woods like pine or fir in your converted fireplace, it is important to install insulated chimney liner systems capable of withstanding high temperatures – Doing so will extend the life of your new unit and eliminate any potential pollutants from entering your living space.

• Another important safety measure is installing spark arrestors at the top of any venting system – These mesh screens prevent blown embers from leaving the chimney and setting neighboring roofs or trees ablaze.

• A professional certified installer should always perform the installation and follow specific manufacturer guidelines for proper drafting procedures in order for all components to function correctly and efficiently.

• Installing carbon monoxide detectors near any combustion engine (which includes most fireplaces) is essential in order to protect occupants from deadly gases emitted during operation both inside ones home and outdoors within its direct vicinity.

Caring for and maintaining newly converted wood fireplaces may require regular cleaning in order to remove creosote build up within flue systems as well as preventing ash accumulation inside the hearth area – By scheduling inspections every few months one can keep their system safe while maximizing its performance potential year after year

Common Issues When Switching From Attempting This DIY Project

Switching from DIY to professional work can be a difficult decision. It requires careful thought and consideration as you weigh the pros and cons of taking on the task yourself versus hiring someone who has more experience and skill with this type of project. For those considering a switch, there are some common issues that need to be addressed in order to make it successful.

The main issue is determining the level of expertise needed for the job. If you are trying to complete a complex task or one that requires specialized tools and know-how, it may not be worth attempting on your own. Unfamiliarity with a specific type of tool or material could lead to costly mistakes and long delays in completion. Hiring an experienced contractor ensures that jobs get done right the first time, saving money and time over the long haul.

Another issue when switching from DIY is handling permits and inspections. Professional contractors are familiar with local building codes, which can help avoid any violations when performing the project. With larger projects such as remodeling or home improvements, contractors will know what paperwork needs to be filed for permits, making them much more likely to pass inspections than if you try doing this yourself without knowledge of local regulations. Having all documents filled out correctly ensures that your work is up to code so it can stand up for years to come without any problems down the road.

Finally, homeowners should consider their safety before tackling a big project on their own. Professional contractors have access to sophisticated tools like scaffolding and ladders that allows them reach places where non-professionals cannot safely go – like high ceilings or tricky corners — ensuring no one gets hurt while they’re working on your home or property.. Working with professionals can also save you costs associated with homeowners’ insurance liability if any injuries occur during the process itself, something DIY attempts may not always cover depending on how specialist subcontractors are hired (and possibly even architecture works).

Ultimately, switching from DIY projects comes down each homeowner’s unique situation.. From logistics and tools required to safety concerns involved in completing large tasks around your property successfully — consulting professionals is one of your wisest bets when deciding whether or not it’s wise take take up a certain DIY attempt after carefully assessing these above points!

Scroll to Top