Cozy by the Fire

gas fireplace insert installedThe Cost of Installing a Gas Fireplace Insert

Introduction to Gas Fireplace Insert: Benefits and Cost

Gas Fireplace inserts are a great way to add comfort and charm to any home. Not only do they provide warmth and ambiance, but they can also be quite cost effective compared to traditional fireplaces.

A gas fireplace insert is a self-contained heating appliance that fits into the existing opening of an existing masonry or manufactured wood burning fireplace. It typically has a gas log set with an adjustable flame and variable heat output. The key components of most gas fireplace inserts include the firebox, flue liner, backpanel, baffle plate, vent assembly, pilot light, ignition system and safety features such as child guards. Installing a gas fireplace insert takes approximately 6 hours depending on the model selected and the complexity of installation (i.e., if it requires structural modifications).

One of the key benefits associated with a gas fireplace insert is that it offers convenience since you don’t need to buy wood or create messy piles of ashes when using your insert. In terms of cost savings associated with using a gas fireplace insert, depending on fuel costs in your geographic area this type of appliance could save up to 40% more than standard space-heating gas furnaces over time. Furthermore, because these appliances require less combustible material (no wood!) the risk for fires tied directly to its use is significantly reduced compared to traditional fireplaces which provides added peace-of-mind for users around the issue of safety in their home or office environment(s).

The initial purchase cost associated with installing a new gas fireplace insert can range from $1000-$5000 depending on various factors such as manufacturer/brand name chosen (Duravent Metalbestos vs Napoleon), BTU rating Model #4311f by Howell hearth) required for proper room size coverage (e.g., medium/large), specific detail trimming kits type desired e.g., Modern Ventless Freestanding units etc.), additional venting systems installation requirement etc.). Gas fireplaces also

How to Install a Gas Fireplace Insert in Your Home: Step by Step Guide

1. Prepare the Firebox: Start by assessing the existing fireplace dimensions and making sure that your gas fireplace insert will fit correctly. Make necessary adjustments to the firebox using a masonry drill and bit to widen or deepen it if needed.

2. Install the Gas Line: Install your gas line in accordance with local regulations, ensuring that no bends or angles force compression on its interior. Hire a qualified technician if you are unfamiliar with gas lines and installation processes.

3. Fit the Insert: Place the insert into the firebox and secure it using screws, bolts, mounting brackets and other hardware provided by its manufacturer. Tighten all components completely without overtightening them – even shifting of heavy inserts can damage delicate surfaces when inserted too far back into a shallow firebox opening; ensure sufficient room arrives around the sides for ash insulation once installed and secured properly. Plus, make sure to check for any overhang past opening edges or supports which may require an obstruction-free air space of around 1-inch all around outside edges of openings so as not to trap flammable debris or heat layers against walls or combustibles nearby

4. Connect Appliance Flexible Pipe: Next, attach flexible pipe from appliance inlet exhaust collar towards exterior but leave enough slack for insertion/removal of appliance within firebox as well as minor movements for comfort during operation – never compress pipe once tightened down securely onto appliance! This allows room for adjustment without decreasing airflow performance & creates adequate clearance between moving parts & combustibles nearby such as siding etc…

5. Test Connections & Apply Sealants: Confirm leak tightness at connection points after verifying proper sizing & orientation with stiff wire brush wheel attached to electric drill (if needed). Use high temperature silicone sealant on threads where applicable as extra precautionary measure – this should provide extra assurance that every connection point is secure prior suppressing line test prior assisted by qualified technician; also ensure sealant used contains no petroleum

Safety Precautions When Installing a Gas Fireplace Insert

When installing a gas fireplace insert, safety should always be your top priority. Although the installation process itself is relatively simple, there are a handful of steps that should be taken in order to ensure that you have both an aesthetically pleasing and safe fire feature. This article will provide a detailed explanation of the safety precautions that need to be taken before, during, and after the installation of a gas fireplace insert.

Before Installation:

The first step to make sure your installation is as safe as possible starts long before you even get out the toolbox. It’s important to make sure that your chosen spot for installation meets all building codes and is properly ventilated according to manufacturer’s recommendations or local code requirements. Additionally, check that there is enough room around the area for anyone who might want to use it since clearances may required around all sides of your insert. Finally, familiarize yourself with any documents associated with the product like warranties or operating instructions in order to ensure proper function once installed.

During Installation:

Once you begin the physical install process, always follow*manufacturer guidelines*. Often times manufacturers include specific guidelines for assembly and installation which must be followed for proper operation and warranty coverage; these steps can also help to reduce any potential hazard risks related to incorrect procedure application. Additionally, it’s important throughout this stage of the process not only focus on safely installing everything but doing it properly using exactly what was included in your kit or upsell package as configuration deviations can sometimes cause unexpected results and unsafe conditions such as increased risk of gas leakage or improper ventilation issues leading to potentially hazardous situations..

After Installation:

After everything has been properly connected and secured you need to immediately run through several checks in order test how well everything functions together. Check over necessary connections like those between gas lines which connect directly into your system – a leak test should be conducted in order confirm they are secure before allowing usage of the unit while running

Maintenance Tips for Your Gas Fireplace Insert

Maintaining your gas fireplace insert will help to ensure it runs safely, efficiently and maintains its aesthetic beauty for years to come. Here are some essential maintenance tips for you to be aware of:

1. Regularly check the vent pipe: An often-overlooked part of gas fireplaces is the vent pipe; however, it’s essential that it remains in good condition and clear of any obstruction. Make sure to examine the entire length periodically, both inside and out. If any blockages or damage is visible, this should be rectified as soon as possible by a qualified professional. Gaps in any part of the ductwork can lead to leaks which could endanger your health and safety due to carbon monoxide poisoning.

2. Keep an eye on seals and gaskets: Fireplace inserts use gaskets and seals at various points of contact between different sections; they are an important component when it comes to airtight joints necessary for efficient burning and storing fuel gases safely inside the unit. Check them regularly; if they appear damaged then again seek professional advice immediately before carrying out repairs yourself with specialist materials from your supplier only!

3. Ensure adequate waterproofing is in place: Buildings constructed near waterways need water protection around their gas fireplaces much like any other protective surroundings outside the home such as garden walls or patios; ensuring these barriers remain intact is key to keeping water out of your insert’s interior components so inspect them every six months for cracks or missing pieces and act swiftly if anything needs addressing such as adding additional waterproof sealers/coverings where appropriate given the climate conditions where you live.

4 Deep clean once a year: It goes without saying but fireplace inserts accumulate dirt, grime and dust over time just like any other appliance so proper cleaning is required once a year (at least). You can do this yourself provided you feel comfortable taking apart each component (again getting instructions from specialists beforehand

Frequently Asked Questions About Gas Fireplace Inserts

Q. What is a gas fireplace insert?

A. A gas fireplace insert is a prefabricated appliance that can be installed into an existing traditional masonry or manufactured wood-burning fireplace opening to create a more efficient and cleaner burning fire. This type of unit typically uses natural gas or propane, like many other indoor appliances, to produce heat efficiently and without producing smoke as most traditional fireplaces do. Modern versions come in various shapes and sizes, from basic inserts designed to convert your existing brick-lined box into an efficient heater, to larger luxurious models offering the look and feel of a true built-in gas-burning stove.

Q. How does a gas fireplace insert work?

A. Gasfireplace inserts are heated by the combustion process involving two components: the burner that serves as air intake, releasing fuel in vapor form; and the ceramic log set containing perforations filled with flames which propel the heat up towards your living space. Together they generate a modern looking glowing hot flame shape without producing soot or toxic fumes typical for open fires – creating unparalleled comfort levels throughout the room..

Q. What types of gas fireplace inserts are there?

A. Gas fireplace inserts have become increasingly popular among homeowners due to their increased energy efficiency compared with open fireplaces. There are two main types available on today’s market: vented models, which require installation of flue taps connected to venting systems outdoors in order expel smoke out of the home; and non-vented units which feature direct vent technology sending gasses outside through sealed pipes located directly beneath the floorboard level of your home’s subfooring system while intaking fresh air from above the surrounding living space ceiling level..

Q Is it expensive to install a gas fireplace insert?

A Generally speaking, installation costs of inserting a new gas fueled model will be lower than constructing an entirely new structure since you’ll be utilizing existing infrastructure such as chim

Top 5 Facts You Need To Know About Installing a Gas Fireplace Insert

1. Calculate capacity of existing chimney before installation – Before installing a gas fireplace insert, be sure to have the potential size of the insert unit and determine whether or not your existing chimney can handle the exhaust produced by it. This will involve having a professional carry out an inspection or sweep to confirm the internal diameter, accessibility and condition of the current flue and then use their findings to calculate a correct output rating.

2. Checking building regulations – Most local councils require that all new combustible appliances are subject to Building Regulations approval before they can be installed in any home. It is important to ensure that you follow any applicable guidelines as failure to do so could result in hefty fines. Furthermore, whilst some installations may not require Building Regulations approval, considering you may need additional services such as ventilation which would make this mandatory anyway.

3. Understand the safety features – Gas fireplaces come with a range of safety features intended for enhanced protection during operation including oxygen depletion sensors (ODS) and thermocouples which shut off fuel if there is inadequate oxygen levels or danger from overheating respectively. Consider these features when selecting your appliance since their presence gives added peace of mind especially given that most models will already have them as standard in this day and age.

4 Obtain proper permits & licenses – Presuming that building regulations approval has been established then you must also obtain any required permits from Fire Safety Authorities as well as any applicable licenses needed for completing the job safely such as Gas Safe registration (for those dealing with natural gas). These documents confirm that any work completed was authorized by relevant authorities and signed off on their end ensuring secure standards are met throughout installation procedure – without one it’s highly unlikely an insurer would cover damage caused by leakage etcetera related failures afterwords due negligence pre-installation setup stages; hence obtaining these certificates is pertinent!

5 Ensure proper ventilation – Installing inefficient vents can cause problems due to accumulation of

Scroll to Top