DIY Guide: How to Create a Cozy Electric Fireplace Wall

DIY Guide: How to Create a Cozy Electric Fireplace Wall Tips for Choosing the Right Fireplace

Introduction: What Are the Advantages of Building an Electric Fireplace Wall?

Electric fireplaces are becoming increasingly popular as a viable alternative to traditional wood burning stoves. They offer many advantages over their wood burning counterparts, such as being far more energy efficient, while producing the same cozy and inviting atmosphere that we’ve come to enjoy so much from wood-burning fires.

One of the great benefits of installing an electric fireplace on your wall is that it doesn’t require any chimney or ventilation requirements. This is a significant benefit for those who live in areas where installing a working chimney may not be an option due to space restrictions or other local regulations. Furthermore, electric fireplaces can easily be installed into nearly any type of wall with minimal effort and expense – making them far easier to install than most other types of fireplaces.

In addition, electric fireplaces don’t produce smoke or ash like traditional fireplaces do and this could be lifesaving for those who suffer from allergies or asthma since allergen particles won’t get into the air when you use one. And because they don’t require fuel or any kind of labor, you’ll never have to worry about maintenance! You can just turn it on whenever you need some additional warmth in your home, without having to haul out logs and deal with sweepings afterwards – which makes them perfect for all seasons!

Perhaps one of the greatest benefits of building an electric fireplace wall is its appearance. Electric fireplaces are sleek and chic —very modern looking—and they can help suit even the most discerning taste when designing a room’s décor. There are plenty of beautiful styles and designs available so it isn’t hard to find one that fits perfectly with the overall aesthetic in whichever living space you choose to integrate it into. Plus they take up very little space—you can choose between wall mountable fireplaces or built-in models depending on what fits best with your particular decorating scheme—giving you added versatility when redistributing interior design resources.

It’s also worth noting that electric fireplaces typically cost quite a bit less than traditional ones — often costing about half as much — making their long term value especially appealing for homeowners looking for an easily maintained source of supplemental heat during colder months without breaking their wallet open wide each time winter rolls around!

Overall, electric fireplace walls offer numerous advantages over conventional wood stove options. They save money by being incredibly efficient; create a modern environment; look aesthetically pleasing; don’t need ventilation setups; don’t release unhealthy fumes while running; require little maintenance obligations; fit comfortably onto walls giving homes more room; cost significantly less than traditional units; provide warmth throughout every season — what more could anyone want out of their home heating solution?

Step 1: Plan Out Your Electric Fireplace Wall

Before you get started installing your electric fireplace wall, it’s important to plan out the project. Measure your wall space and make sure you know where all of the necessary outlets are located. Consider the placement of the mantel and other decorations in relation to windows, doors, and furniture. Make sure that any shelves or nooks you may want in your design can actually fit into the allotted space.

Step 2: Start with Framing the Wall

Once you have planned out your electric fireplace design, it’s time to start putting it together! Start by framing the wall according to your plans. Remember to secure each frame board securely with screws or nails. It is especially important that there are enough studs behind each frame board so that it can support any mantel decorations or other heavier objects on top of it. If needed, feel free to use tapered screws for additional security in this step.

Step 3: Install the Fireplace Unit

Now’s when things start getting really exciting! Take your electric fireplace unit and install it into the wall according to manufacturer’s instructions. Make sure that all wiring is properly installed and connected before moving forward with additional steps in this process. Once everything is set up correctly, connect a 120V power adapter plug and plug into an outlet close by (if using a 120V plug-in model). If using a recessed model, also double check that all wiring is secured properly according to local codes before moving forward with additional steps.

Step 4: Finish Up Your Electric Fireplace Wall

The last steps in installing an electric fireplace are usually finishing touches such as adding drywall around uneven edges and applying grout between tiles if installed over a tile wall. Once everything has been setup properly, test out both the heating capacity of the electric unit as well as its aesthetic features like LED lighting or flame visuals (depending on what features were chosen for your particular model). And finally admire how great your new electric fireplace looks!

Step 2: Prepare the Room for Installation of the Electric Fireplace Wall

Once you’ve found the ideal location for your electric fireplace wall, the next step is to prepare the room. Proper preparation of the space is essential to ensure that installation and operation of your new unit runs smoothly.

First, make sure that the chosen location meets all local fire safety guidelines and building codes by consulting with a qualified contractor in advance. This includes considering any potential risks posed by smoke detectors or nearby combustible materials, as well as other factors such as ventilation requirements.

Next, turn off the electricity to that area of the house and use a voltage tester double check for any power before beginning work. Then, remove any trimwork or walls that may be in front of where you want to install your electric fireplace wall. If wiring needs to be run from an auxiliary circuit breaker panel to one within reach of your unit, consult with an electrician before beginning this process.

Now it’s time to determine where on the wall you will hang your electric fireplace wall unit. If you don’t have studs available in which to mount it, use specialized anchors designed for heavy frames such as walls away support brackets when mounting directly into drywall or plaster without attaching into a structural element beneath it. Assemble any accessories such as mantels painted or left natural and holder brackets according to manufacturer instructions and double-check every connection prior to securing pieces together permanently using screws and/or adhesives included with items purchased.

Finally, complete your room preparation for installation of an electric fireplace wall unit by taking measurements for placement of brick panels (if applicable) and ensuring there is adequate electrical access connections above or below at least 30 inches from floor level so proper cord management can take place during assembly process. Additionally measure openings between adjacent trim pieces so center channel output is not obstructed when corner format units are used instead of straight wall mounted designs making sure TV viewers are not blocked from all angles when viewing television programs comfortably from most comfortable seated position possible.”

Step 3: Install the Electrical and Framing Necessary for Your Electric Fireplace Wall

Now we will move on to step 3, which is installing the electrical and framing necessary for your electric fireplace wall. This step may seem intimidating, but with a few simple steps, you can make sure everything is installed correctly and safely!

First, make sure that the area you plan to install the fireplace has adequate floor support. Installing an electric fireplace carries substantial weight in the form of studs or concrete and brick or block needed for stability during installation. If you don’t have anything like this ,you need to add it before moving forward as failure to do so could result in an unstable structure.

Next, identify where the electrical outlets are going to be installed in order to power your electric fireplace. Depending on the unit you purchase, there may be multiple outlets required. Create a pathway from these outlets all the way up the wall behind where your electric fireplace will sit by drilling into what’s already present and running wiring when necessary – just make sure it isn’t exposed and sticks out of any outlet sheaths! Finally, build a frame around where your electric hearth should go according to manufacturer instructions in order for proper installment of your model. Once this frame is up, you’re all set to finish connecting all our wires back together and attach/hang up our new addition!

Step 4: Choose and Place an Insert Into Your Electric Fireplace Wall

Installing an insert into your electric fireplace wall is a great way to upgrade the look and feel of your living space while adding much needed ambiance. However, selecting and placing an insert can be a daunting task with so many different shapes and sizes available. Here are some key points to consider when shopping for and installing an electric fireplace insert:

1. Make sure you measure the cavity of your wall — In order to ensure that you get the best size and shape fit for your new electric insert, make sure to take precise measurements of the dimensions inside the cavity of your fire place wall. Also, check any manufacturer stated specs as they usually list appropriate sizing information.

2 Do a little research — Check out online reviews or speak to potential vendors about their recommendations. Taking this extra step will help you get a better feel for what model is best for you. Doing some comparison shopping is a great way to find the best deal on your new electric fireplace insert as well.

3 Select an appropriate “look” — Electric inserts come in a variety of styles so choose one that complements both the current decorations in your living room or other entertaining area and also think about how it will look when lit up! If you have existing brick work brick-faced models are great options; however, if your home has minimal décor then maybe sleek black steel finish would work better with its more modern appearance.

4 Inspect before installation — Once all measurements have been taken, inspect all components (electric panels, trim pieces, mounting hardware etc.) thoroughly before attaching anything permanently -ask yourself if everything fits correctly? If not be sure to contact those in charge immediately since these issues are better dealt with BEFORE any irreversible installation steps begin! Then double-check instructions from manufacturers or their websites regarding operation instructions as no two models operate the same -just like any piece of technology!

5 Now Install & enjoy! –Now comes the fun part: install! Remember all those preparation steps mentioned earlier? Those measures will make this process go very smooth as long as assembly directions followed precisely -even being 1 inch off can lead costly misalignments down the road! Congratulations on completing this easy upgrade –enjoy that warm glow throughout winter months ahead!

FAQs About Building an Electric Fireplace Wall

Q: What are the benefits of building an electric fireplace wall?

A: Building an electric fireplace wall offers several advantages. First, it eliminates the need for ventilation and can be used to warm a room without emitting smoke or fumes. Second, modern electric fireplaces offer realistic flames and can create a cozy atmosphere in any space. Finally, homeowners can easily customize the wall to fit their home’s design aesthetic by choosing from different materials such as wood, tile, stone and brick.

Q: How much will building an electric fireplace wall cost?

A: The cost of building an electric fireplace wall depends on several factors including the size of the wall (and any additional features), installation costs and product choice. Generally speaking, installing a basic unit with minimal customization should range between $650 – $1,500 depending on local labor rates. It’s always best to contact your local professional installer for more detailed quotes.

Q: What kind of materials can I use when constructing my electric fireplace wall?

A: Building materials typically correspond with that of traditional masonry fireplaces – think wood framing and sheetrocking, tiling or other cladding material (brick / stone). Noncombustible materials such as metal may also be used for ventilation covers or frames. Contact your professional installer for more information about specific products and manufacturer’s recommendations related to your particular install job.

Q: Do I need special tools or expertise to construct my own electric fireplace wall?

A: Most people who are comfortable tackling DIY projects around their homes can follow clear instructions to complete basic installations; however you may want to consider hiring a professional if you are unsure of your skill set or don’t have access to all necessary tools and supplies. Professional installation is important not only for safety reasons but also so electrical requirements (such as junction boxes) are completed correctly according to approved codes in your state/country regulations.

Rate article
Add a comment