Cozy by the Fire

Best Gas Fireplace Inserts: A Guide to Finding the Perfect Fit

What Should You Consider Before Purchasing a Gas Fireplace Insert?

When shopping for a gas fireplace insert, there are several things to consider before making a purchase. First and foremost, it’s important to assess the size of your existing fireplace opening to ensure that the insert will fit correctly. If you’re installing into an existing masonry combustible, make sure that it is in good shape with no signs of water damage or structural issues. In addition, be aware of any local building codes as they may require certain safety features on your new gas fireplace insert.

Next, consider the type of fuel you want to use. Depending on where you live, natural gas inserts are generally less expensive than their propane counterparts and can offer significant savings over time. Make sure you select an insert with a flame pattern and heat output to meet your expectations; most products have adjustable settings for both providing further customization options upon installation. You should also think about other features such as automatic lighting controls or multi-setting remotes which allow for better control over your fireside experience.

Finally, take cost into consideration when selecting a gas fireplace insert. Prices range significantly based on style, size and efficiency rating so shop around for one that meets your budget requirements without sacrificing quality in the process. Keep in mind that any additional installation costs should be factored into final expenses as well; enlisting professional help will ensure an efficient installation while helping to avoid costly mistakes down the line.

Answering these questions honestly and thoughtfully before buying a gas fireplace insert will help ensure that you get the best product possible at the right price point – ensuring years of enjoyment from your cozy gas fire!

How to Choose the Right Size Gas Fireplace Insert for Your Home

Choosing the right size gas fireplace insert is essential to ensure your home is comfortable and energy efficient. While finding the correct model for your space can seem confusing, if you start with these basics you’ll be off to a roaring fire in no time.

The first step when choosing a gas fireplace insert size is to measure the space where you’re planning on installing it. Measure both height and width of the opening, so that you have an accurate idea of what dimensions should be considered. The ideal fit will always depend upon your individual measurements, but here are some general guidelines when selecting a size for your insert:

• Small Room / Bedroom – If you plan on heating a smaller room like a bathroom or bedroom, your best bet would be to choose an insert that has an output of 8,000–12,000 BTUs per hour. This range is typically suitable for spaces of up to 400 square feet.

• Medium Room – Depending on how much heat you need or desire in the medium-sized room (up to 700 square feet), consider an output of 10,000–18,000 BTUs per hour. Take into account insulation factors as well as whether there are nearby windows or doors with drafts that could impact your desired warmth level—you may want to adjust accordingly based on those factors too.

• Large Room / Whole Home – For larger rooms or if heating an entire home, look for something between 18,000–30,000 BTU per hour depending on insulation quality and other outside temperatures that may affect heat absorption from your gas fireplace inserts (for example things like snow/wind chill).

In addition to BTU ratings specific sizes and models also offer different decorative options such as style/design (from traditional wood burning stoves to sleek modern lines), log sets and various accessories like remote control fans and thermostats etc., so it’s important to factor in those details

Comparison of Different Types of Gas Fireplace Inserts

The fireplace is one of the most beloved, visually pleasing and efficient heating sources in homes today. With a variety of options available on the market, it’s important to understand the differences between gas fireplace inserts so that you can make an informed decision when it comes to buying.

There are three main types of gas fireplace inserts: natural gas, propane and electric. Each type offers its own unique benefits and should be considered carefully when making a purchase. Natural gas fireplaces offer efficiency benefits and are often cheaper than the other two fuels. Propane is usually more portable than natural gas and is becoming more popular for its convenience and environmental sustainability. Electric units are easy to use, cost-effective, but have limited size options compared to other fuel types.

When considering which type of insert to purchase for your home, consider factors such as heating capacity/BTU output (depending on your region’s climate), ease of installation/maintenance requirements, cost (both initial installation and long-term costs), safety considerations and local regulation restrictions or standards within your geographic area that may dictate the type of fuel you can legally use in your home. Natural gas fireplaces require professional installation due to their use of pipes running into a venting system and require periodic maintenance over the years while electric units simply plug into existing outlets within close proximity without any setup or maintenance required. Knowing these factors ahead of time will help ensure you make an informed decision based on individual needs such as budget constraints or regional regulations prior to purchasing a new insert for your home!

Step by Step Guide to Installing a Gas Fireplace Insert

It’s finally time to upgrade your old fashioned gas fireplace with a modern fireplace insert. Whether you’re looking to improve the efficiency, convenience and style of your outdated wood-burning fireplace, or give your home a fresh new look, an easy-to-install gas fireplace insert can be just the thing. In this step-by-step guide, we’ll show you how to replace your existing gas fireplace with a beautiful new gas fireplace insert.

A gas insert requires some unique preparation for installation. First, take measurements of existing opening and select properly sized firebox for replacement. Also confirm that the room is ventilated according to local codes and check if special permission is needed from local authorities for installing a ventless insert. For vented models, setup and alignment of direct vent pipe will be also required.

After selecting the model you desire and procuring all materials needed (consult product manual or manufacturer’s website), next step is to go ahead with disconnecting existing unit from its fuel source while following safety guidelines outlined above. After completing those two steps, it’s time to begin installation process itself:

1) Assemble the components together as per instructions illustrated in product manual; make sure there are no loose connection points on enclosed fire unit before proceeding any further

2) Connect the appropriate sensor cable(s) from the enclosure back towards applicable wall switch outlet

3) Secure frame into place (anchor bolts may come included with some models); after completion ensure proper gap between frame edges/back wall has been created so that chimney ventilation pipe can fit properly when installed

4) Install direct vent pipe / exhaust fan assembly according to instructions or as provided by certified installer; double check that all necessary seals/gaskets have been used where sealing joints are located

5) Now that parts are all in place start wiring up power supply cable accordingly – observe colour coding scheme distribution indicated before start & check

FAQ About Choosing and Installing a Gas Fireplace Insert

Installing a gas fireplace insert can be a great way to add warmth and ambiance to your home. But before you choose an insert, it’s important to understand the details and potential risks to ensure that you make the best decision for your needs. Here are some frequently asked questions (FAQs) that may help with making an informed decision about investing in a gas fireplace insert:

Q: What types of gas inserts are available?

A: The most common type of gas insert is designed for wood-burning fireplaces, and it allows for efficient combustion without having to worry about buying or storing wood. These units typically come with venting systems or insulation kits that will help improve their efficiency and provide better air quality during operation. Other types of gas inserts involve direct venting, which allows them to be placed directly against exterior walls or other combustible materials. And there are also sealed kits with electric ignition that require no ventilation at all, except in rare cases where special permission from local codes is necessary for installation.

Q: What should I consider when choosing an insert?

A: It is important to evaluate factors such as size, style, BTU rating, fuel type, safety features, installation costs, maintenance requirements, warranties and more when selecting a gas fireplace insert. Be sure that all applicable building codes have been followed when having the new unit installed into existing walls or floors as well. Additionally, always use caution when working with combustible materials such as natural gases near open flames!

Q: How do I clean a new gas insert?

A: It’s essential to properly maintain your new appliance in order to ensure optimal performance over time. After installing the new unit according to manufacturer instructions (for example; flue coverings if applicable), consult their warranties regarding requirements related to cleaning frequency and methodologies used for debris removal from within the appliance itself (venting systems included). A few specific steps may include vac

Top 5 Facts to Know About Choosing The Best Gas Fireplace Insert For Your Home

1. Determine Your Needs

When choosing the best gas fireplace insert for your home, it’s important to consider your specific needs and preferences. Different inserts vary in size, heat output, and installation type. Choose a model that will fit both your space and budget while meeting your heating needs.

2. Consider Installation Options

Gas fireplace inserts come in two main types: direct vent and natural vent models. Direct vents are less expensive but more complicated to install, while natural vents are easier to install but generally cost more upfront. Depending on the space you have available and the amount of money you want to spend, one of these options may be better for you than the other.

3. Pay Close Attention To Efficiency Ratings

It’s also important to select a gas fireplace insert with an efficiency rating that fits your energy goals. The efficiency rating guides how much of the fuel used is actually converted into warmth, so aim for a higher number if possible without going over budget

4. Consider Design Options Carefully

Many inserts feature a range of finishes such as porcelain or powder coated enamel in various colors so you can find something that matches your existing décor perfectly. You can even find units with realistic-looking logs to up the ambience in any room of the house!

5. Get Help From An Expert

If you’re unsure about which gas fireplace insert is right for your home based on all these factors, contact a local HVAC specialist who can provide tailored advice and recommendations based on their experience with similar projects

Scroll to Top